睇下有冇 R&啲中心去設計自己嘅力量設備; talk with the designers about design concepts.

問下設計師係 R&啲中心如果佢哋平時用 gym 設備鍛煉. Designers who do not work out with gym equipment should never design any strength training machine.

你應該自己試下健身器材. 你需要體驗以下三個方面:

Whether it is smooth to use.

Whether specific equipment is activating your targeted muscle group.

用於融合及分歧設備, whether there is a peak contraction experience.

Know about the specific treatment methods applied to the surface.

Check if the surface is smooth to the touch.

攞個硬金屬物件, 例如鎖匙, and scratch the surface of the equipment in order to see the adhesion of the surface coating.

管標準: 問供應商有關呢條管嘅標準. 係中國, 例如, you should expect fitness equipment pipes to meet Q235 standard.

管道大小: 要搵 40mm x 80mm 以上，係車架管嘅長度同寬度, preferably with 3.0mm in thickness.

治療: bending production procedure is preferred over cutting and welding.

檢查原料嘅厚度, not the the painted tube.

問廠代表關於治療方法，如果係喺廠房，就唔好再搵啦, as well as the theoretical basis of the connection.

Check the thickness of the connecting plate and the strength of the screw.

-座位填充:

Press the seat firmly with your thumb or apply a specific instrument to measure its density level.

-座位皮革:

聞到: Check whether there is any pungent smell.

觸覺印象: Touch the surface by hand and confirm the tactile impression.

密度: 從切割 / 側面觀察，並檢查其孔隙; 孔子越多, the lower the density and quality.

厚度: 檢查材料嘅厚度; 越厚, 越好;

-座位支援盤

檢查所用嘅材料. 一般嚟講, ABS is better than iron board and plywood.

Check the appropriateness of the match between fillings and support plate.

-座位調整員

調整幾次座位，睇下係咪易用. 調整完座位之後, sit on it and shake to test its stability.

-普利利

物質: Determine the material used and assess whether it is appropriate based on our comparison chart.

穩定性: Make the pulley rotate and observe whether it wobbles.

-CAM:

Determine the material applied and assess whether it is suitable according to the comparison chart.

Check whether the pulley and CAM are smooth when used.

Use the machine and confirm whether its design is in line with the principle of movement.

-有線電視:

檢查電纜嘅厚度; 越厚, the more solid the cable will be.

如果你買嚟商業用途, never be cheated by manufacturers who apply home use material to industrial equipment.

Ask about the maximum load capacity along with fatigue test report and check the results.

符合標準 ISO20957: 檢查有冇 ISO20957 嘅證書, which means the equipment has passed the International Organization for Standardization.

穩定性: 試下推個釘裝機去 check 下佢係咪穩定. 喺好似 Lat Pulldown 噉嘅機器上面, 揀最大重量, then suddenly loosen the handle to see if the device is still stable.

總淨重: 減去重量板; 重啲, the safer.

整體結構: the surface of the fitness equipment pipe should be free of any protrusions so as to avoid injury.

表面嘅邊緣同角落應該有半徑 ≥ 2.5mm. They should also be free of burrs and make use of round corners.

管結束: 所有管端都應該係冇障礙手, and the foot area should be closed off.

You should be able to stop the motion at any time.

The weight selection pin should be fitted with a holding system to prevent accidental change or movement during exercise.

睇下有冇 R&啲中心去設計自己嘅力量設備; talk with the designers about design concepts.

問下設計師係 R&啲中心如果佢哋平時用 gym 設備鍛煉. Designers who do not work out with gym equipment should never design any strength training machine.

你應該自己試下健身器材. 你需要體驗以下三個方面:

Whether it is smooth to use.

Whether specific equipment is activating your targeted muscle group.

用於融合及分歧設備, whether there is a peak contraction experience.

Know about the specific treatment methods applied to the surface.

Check if the surface is smooth to the touch.

攞個硬金屬物件, 例如鎖匙, and scratch the surface of the equipment in order to see the adhesion of the surface coating.

管標準: 問供應商有關呢條管嘅標準. 係中國, 例如, you should expect fitness equipment pipes to meet Q235 standard.

管道大小: 要搵 40mm x 80mm 以上，係車架管嘅長度同寬度, preferably with 3.0mm in thickness.

治療: bending production procedure is preferred over cutting and welding.

檢查原料嘅厚度, not the the painted tube.

問廠代表關於治療方法，如果係喺廠房，就唔好再搵啦, as well as the theoretical basis of the connection.

Check the thickness of the connecting plate and the strength of the screw.

-座位填充:

Press the seat firmly with your thumb or apply a specific instrument to measure its density level.

-座位皮革:

聞到: Check whether there is any pungent smell.

觸覺印象: Touch the surface by hand and confirm the tactile impression.

密度: 從切割 / 側面觀察，並檢查其孔隙; 孔子越多, the lower the density and quality.

厚度: 檢查材料嘅厚度; 越厚, 越好;

-座位支援盤

檢查所用嘅材料. 一般嚟講, ABS is better than iron board and plywood.

Check the appropriateness of the match between fillings and support plate.

-座位調整員

調整幾次座位，睇下係咪易用. 調整完座位之後, sit on it and shake to test its stability.

-普利利

物質: Determine the material used and assess whether it is appropriate based on our comparison chart.

穩定性: Make the pulley rotate and observe whether it wobbles.

-CAM:

Determine the material applied and assess whether it is suitable according to the comparison chart.

Check whether the pulley and CAM are smooth when used.

Use the machine and confirm whether its design is in line with the principle of movement.

-有線電視:

檢查電纜嘅厚度; 越厚, the more solid the cable will be.

如果你買嚟商業用途, never be cheated by manufacturers who apply home use material to industrial equipment.

Ask about the maximum load capacity along with fatigue test report and check the results.

符合標準 ISO20957: 檢查有冇 ISO20957 嘅證書, which means the equipment has passed the International Organization for Standardization.

穩定性: 試下推個釘裝機去 check 下佢係咪穩定. 喺好似 Lat Pulldown 噉嘅機器上面, 揀最大重量, then suddenly loosen the handle to see if the device is still stable.

總淨重: 減去重量板; 重啲, the safer.

整體結構: the surface of the fitness equipment pipe should be free of any protrusions so as to avoid injury.

表面嘅邊緣同角落應該有半徑 ≥ 2.5mm. They should also be free of burrs and make use of round corners.

管結束: 所有管端都應該係冇障礙手, and the foot area should be closed off.

You should be able to stop the motion at any time.

The weight selection pin should be fitted with a holding system to prevent accidental change or movement during exercise.

睇下有冇 R&啲中心去設計自己嘅力量設備; talk with the designers about design concepts.

問下設計師係 R&啲中心如果佢哋平時用 gym 設備鍛煉. Designers who do not work out with gym equipment should never design any strength training machine.

你應該自己試下健身器材. 你需要體驗以下三個方面:

Whether it is smooth to use.

Whether specific equipment is activating your targeted muscle group.

用於融合及分歧設備, whether there is a peak contraction experience.

Know about the specific treatment methods applied to the surface.

Check if the surface is smooth to the touch.

攞個硬金屬物件, 例如鎖匙, and scratch the surface of the equipment in order to see the adhesion of the surface coating.

管標準: 問供應商有關呢條管嘅標準. 係中國, 例如, you should expect fitness equipment pipes to meet Q235 standard.

管道大小: 要搵 40mm x 80mm 以上，係車架管嘅長度同寬度, preferably with 3.0mm in thickness.

治療: bending production procedure is preferred over cutting and welding.

檢查原料嘅厚度, not the the painted tube.

問廠代表關於治療方法，如果係喺廠房，就唔好再搵啦, as well as the theoretical basis of the connection.

Check the thickness of the connecting plate and the strength of the screw.

-座位填充:

Press the seat firmly with your thumb or apply a specific instrument to measure its density level.

-座位皮革:

聞到: Check whether there is any pungent smell.

觸覺印象: Touch the surface by hand and confirm the tactile impression.

密度: 從切割 / 側面觀察，並檢查其孔隙; 孔子越多, the lower the density and quality.

厚度: 檢查材料嘅厚度; 越厚, 越好;

-座位支援盤

檢查所用嘅材料. 一般嚟講, ABS is better than iron board and plywood.

Check the appropriateness of the match between fillings and support plate.

-座位調整員

調整幾次座位，睇下係咪易用. 調整完座位之後, sit on it and shake to test its stability.

-普利利

物質: Determine the material used and assess whether it is appropriate based on our comparison chart.

穩定性: Make the pulley rotate and observe whether it wobbles.

-CAM:

Determine the material applied and assess whether it is suitable according to the comparison chart.

Check whether the pulley and CAM are smooth when used.

Use the machine and confirm whether its design is in line with the principle of movement.

-有線電視:

檢查電纜嘅厚度; 越厚, the more solid the cable will be.

如果你買嚟商業用途, never be cheated by manufacturers who apply home use material to industrial equipment.

Ask about the maximum load capacity along with fatigue test report and check the results.

符合標準 ISO20957: 檢查有冇 ISO20957 嘅證書, which means the equipment has passed the International Organization for Standardization.

穩定性: 試下推個釘裝機去 check 下佢係咪穩定. 喺好似 Lat Pulldown 噉嘅機器上面, 揀最大重量, then suddenly loosen the handle to see if the device is still stable.

總淨重: 減去重量板; 重啲, the safer.

整體結構: the surface of the fitness equipment pipe should be free of any protrusions so as to avoid injury.

表面嘅邊緣同角落應該有半徑 ≥ 2.5mm. They should also be free of burrs and make use of round corners.

管結束: 所有管端都應該係冇障礙手, and the foot area should be closed off.

You should be able to stop the motion at any time.

The weight selection pin should be fitted with a holding system to prevent accidental change or movement during exercise.

睇下有冇 R&啲中心去設計自己嘅力量設備; talk with the designers about design concepts.

問下設計師係 R&啲中心如果佢哋平時用 gym 設備鍛煉. Designers who do not work out with gym equipment should never design any strength training machine.

你應該自己試下健身器材. 你需要體驗以下三個方面:

Whether it is smooth to use.

Whether specific equipment is activating your targeted muscle group.

用於融合及分歧設備, whether there is a peak contraction experience.

Know about the specific treatment methods applied to the surface.

Check if the surface is smooth to the touch.

攞個硬金屬物件, 例如鎖匙, and scratch the surface of the equipment in order to see the adhesion of the surface coating.

管標準: 問供應商有關呢條管嘅標準. 係中國, 例如, you should expect fitness equipment pipes to meet Q235 standard.

管道大小: 要搵 40mm x 80mm 以上，係車架管嘅長度同寬度, preferably with 3.0mm in thickness.

治療: bending production procedure is preferred over cutting and welding.

檢查原料嘅厚度, not the the painted tube.

問廠代表關於治療方法，如果係喺廠房，就唔好再搵啦, as well as the theoretical basis of the connection.

Check the thickness of the connecting plate and the strength of the screw.

-座位填充:

Press the seat firmly with your thumb or apply a specific instrument to measure its density level.

-座位皮革:

聞到: Check whether there is any pungent smell.

觸覺印象: Touch the surface by hand and confirm the tactile impression.

密度: 從切割 / 側面觀察，並檢查其孔隙; 孔子越多, the lower the density and quality.

厚度: 檢查材料嘅厚度; 越厚, 越好;

-座位支援盤

檢查所用嘅材料. 一般嚟講, ABS is better than iron board and plywood.

Check the appropriateness of the match between fillings and support plate.

-座位調整員

調整幾次座位，睇下係咪易用. 調整完座位之後, sit on it and shake to test its stability.

-普利利

物質: Determine the material used and assess whether it is appropriate based on our comparison chart.

穩定性: Make the pulley rotate and observe whether it wobbles.

-CAM:

Determine the material applied and assess whether it is suitable according to the comparison chart.

Check whether the pulley and CAM are smooth when used.

Use the machine and confirm whether its design is in line with the principle of movement.

-有線電視:

檢查電纜嘅厚度; 越厚, the more solid the cable will be.

如果你買嚟商業用途, never be cheated by manufacturers who apply home use material to industrial equipment.

Ask about the maximum load capacity along with fatigue test report and check the results.

符合標準 ISO20957: 檢查有冇 ISO20957 嘅證書, which means the equipment has passed the International Organization for Standardization.

穩定性: 試下推個釘裝機去 check 下佢係咪穩定. 喺好似 Lat Pulldown 噉嘅機器上面, 揀最大重量, then suddenly loosen the handle to see if the device is still stable.

總淨重: 減去重量板; 重啲, the safer.

整體結構: the surface of the fitness equipment pipe should be free of any protrusions so as to avoid injury.

表面嘅邊緣同角落應該有半徑 ≥ 2.5mm. They should also be free of burrs and make use of round corners.

管結束: 所有管端都應該係冇障礙手, and the foot area should be closed off.

You should be able to stop the motion at any time.

The weight selection pin should be fitted with a holding system to prevent accidental change or movement during exercise.

睇下有冇 R&啲中心去設計自己嘅力量設備; talk with the designers about design concepts.

問下設計師係 R&啲中心如果佢哋平時用 gym 設備鍛煉. Designers who do not work out with gym equipment should never design any strength training machine.

你應該自己試下健身器材. 你需要體驗以下三個方面:

Whether it is smooth to use.

Whether specific equipment is activating your targeted muscle group.

用於融合及分歧設備, whether there is a peak contraction experience.

Know about the specific treatment methods applied to the surface.

Check if the surface is smooth to the touch.

攞個硬金屬物件, 例如鎖匙, and scratch the surface of the equipment in order to see the adhesion of the surface coating.

管標準: 問供應商有關呢條管嘅標準. 係中國, 例如, you should expect fitness equipment pipes to meet Q235 standard.

管道大小: 要搵 40mm x 80mm 以上，係車架管嘅長度同寬度, preferably with 3.0mm in thickness.

治療: bending production procedure is preferred over cutting and welding.

檢查原料嘅厚度, not the the painted tube.

問廠代表關於治療方法，如果係喺廠房，就唔好再搵啦, as well as the theoretical basis of the connection.

Check the thickness of the connecting plate and the strength of the screw.

-座位填充:

Press the seat firmly with your thumb or apply a specific instrument to measure its density level.

-座位皮革:

聞到: Check whether there is any pungent smell.

觸覺印象: Touch the surface by hand and confirm the tactile impression.

密度: 從切割 / 側面觀察，並檢查其孔隙; 孔子越多, the lower the density and quality.

厚度: 檢查材料嘅厚度; 越厚, 越好;

-座位支援盤

檢查所用嘅材料. 一般嚟講, ABS is better than iron board and plywood.

Check the appropriateness of the match between fillings and support plate.

-座位調整員

調整幾次座位，睇下係咪易用. 調整完座位之後, sit on it and shake to test its stability.

-普利利

物質: Determine the material used and assess whether it is appropriate based on our comparison chart.

穩定性: Make the pulley rotate and observe whether it wobbles.

-CAM:

Determine the material applied and assess whether it is suitable according to the comparison chart.

Check whether the pulley and CAM are smooth when used.

Use the machine and confirm whether its design is in line with the principle of movement.

-有線電視:

檢查電纜嘅厚度; 越厚, the more solid the cable will be.

如果你買嚟商業用途, never be cheated by manufacturers who apply home use material to industrial equipment.

Ask about the maximum load capacity along with fatigue test report and check the results.

符合標準 ISO20957: 檢查有冇 ISO20957 嘅證書, which means the equipment has passed the International Organization for Standardization.

穩定性: 試下推個釘裝機去 check 下佢係咪穩定. 喺好似 Lat Pulldown 噉嘅機器上面, 揀最大重量, then suddenly loosen the handle to see if the device is still stable.

總淨重: 減去重量板; 重啲, the safer.

整體結構: the surface of the fitness equipment pipe should be free of any protrusions so as to avoid injury.

表面嘅邊緣同角落應該有半徑 ≥ 2.5mm. They should also be free of burrs and make use of round corners.

管結束: 所有管端都應該係冇障礙手, and the foot area should be closed off.

You should be able to stop the motion at any time.

The weight selection pin should be fitted with a holding system to prevent accidental change or movement during exercise.

睇下有冇 R&啲中心去設計自己嘅力量設備; talk with the designers about design concepts.

問下設計師係 R&啲中心如果佢哋平時用 gym 設備鍛煉. Designers who do not work out with gym equipment should never design any strength training machine.

你應該自己試下健身器材. 你需要體驗以下三個方面:

Whether it is smooth to use.

Whether specific equipment is activating your targeted muscle group.

用於融合及分歧設備, whether there is a peak contraction experience.

Know about the specific treatment methods applied to the surface.

Check if the surface is smooth to the touch.

攞個硬金屬物件, 例如鎖匙, and scratch the surface of the equipment in order to see the adhesion of the surface coating.

管標準: 問供應商有關呢條管嘅標準. 係中國, 例如, you should expect fitness equipment pipes to meet Q235 standard.

管道大小: 要搵 40mm x 80mm 以上，係車架管嘅長度同寬度, preferably with 3.0mm in thickness.

治療: bending production procedure is preferred over cutting and welding.

檢查原料嘅厚度, not the the painted tube.

問廠代表關於治療方法，如果係喺廠房，就唔好再搵啦, as well as the theoretical basis of the connection.

Check the thickness of the connecting plate and the strength of the screw.

-座位填充:

Press the seat firmly with your thumb or apply a specific instrument to measure its density level.

-座位皮革:

聞到: Check whether there is any pungent smell.

觸覺印象: Touch the surface by hand and confirm the tactile impression.

密度: 從切割 / 側面觀察，並檢查其孔隙; 孔子越多, the lower the density and quality.

厚度: 檢查材料嘅厚度; 越厚, 越好;

-座位支援盤

檢查所用嘅材料. 一般嚟講, ABS is better than iron board and plywood.

Check the appropriateness of the match between fillings and support plate.

-座位調整員

調整幾次座位，睇下係咪易用. 調整完座位之後, sit on it and shake to test its stability.

-普利利

物質: Determine the material used and assess whether it is appropriate based on our comparison chart.

穩定性: Make the pulley rotate and observe whether it wobbles.

-CAM:

Determine the material applied and assess whether it is suitable according to the comparison chart.

Check whether the pulley and CAM are smooth when used.

Use the machine and confirm whether its design is in line with the principle of movement.

-有線電視:

檢查電纜嘅厚度; 越厚, the more solid the cable will be.

如果你買嚟商業用途, never be cheated by manufacturers who apply home use material to industrial equipment.

Ask about the maximum load capacity along with fatigue test report and check the results.

符合標準 ISO20957: 檢查有冇 ISO20957 嘅證書, which means the equipment has passed the International Organization for Standardization.

穩定性: 試下推個釘裝機去 check 下佢係咪穩定. 喺好似 Lat Pulldown 噉嘅機器上面, 揀最大重量, then suddenly loosen the handle to see if the device is still stable.

總淨重: 減去重量板; 重啲, the safer.

整體結構: the surface of the fitness equipment pipe should be free of any protrusions so as to avoid injury.

表面嘅邊緣同角落應該有半徑 ≥ 2.5mm. They should also be free of burrs and make use of round corners.

管結束: 所有管端都應該係冇障礙手, and the foot area should be closed off.

You should be able to stop the motion at any time.

The weight selection pin should be fitted with a holding system to prevent accidental change or movement during exercise.

睇下有冇 R&啲中心去設計自己嘅力量設備; talk with the designers about design concepts.

問下設計師係 R&啲中心如果佢哋平時用 gym 設備鍛煉. Designers who do not work out with gym equipment should never design any strength training machine.

你應該自己試下健身器材. 你需要體驗以下三個方面:

Whether it is smooth to use.

Whether specific equipment is activating your targeted muscle group.

用於融合及分歧設備, whether there is a peak contraction experience.

Know about the specific treatment methods applied to the surface.

Check if the surface is smooth to the touch.

攞個硬金屬物件, 例如鎖匙, and scratch the surface of the equipment in order to see the adhesion of the surface coating.

管標準: 問供應商有關呢條管嘅標準. 係中國, 例如, you should expect fitness equipment pipes to meet Q235 standard.

管道大小: 要搵 40mm x 80mm 以上，係車架管嘅長度同寬度, preferably with 3.0mm in thickness.

治療: bending production procedure is preferred over cutting and welding.

檢查原料嘅厚度, not the the painted tube.

問廠代表關於治療方法，如果係喺廠房，就唔好再搵啦, as well as the theoretical basis of the connection.

Check the thickness of the connecting plate and the strength of the screw.

-座位填充:

Press the seat firmly with your thumb or apply a specific instrument to measure its density level.

-座位皮革:

聞到: Check whether there is any pungent smell.

觸覺印象: Touch the surface by hand and confirm the tactile impression.

密度: 從切割 / 側面觀察，並檢查其孔隙; 孔子越多, the lower the density and quality.

厚度: 檢查材料嘅厚度; 越厚, 越好;

-座位支援盤

檢查所用嘅材料. 一般嚟講, ABS is better than iron board and plywood.

Check the appropriateness of the match between fillings and support plate.

-座位調整員

調整幾次座位，睇下係咪易用. 調整完座位之後, sit on it and shake to test its stability.

-普利利

物質: Determine the material used and assess whether it is appropriate based on our comparison chart.

穩定性: Make the pulley rotate and observe whether it wobbles.

-CAM:

Determine the material applied and assess whether it is suitable according to the comparison chart.

Check whether the pulley and CAM are smooth when used.

Use the machine and confirm whether its design is in line with the principle of movement.

-有線電視:

檢查電纜嘅厚度; 越厚, the more solid the cable will be.

如果你買嚟商業用途, never be cheated by manufacturers who apply home use material to industrial equipment.

Ask about the maximum load capacity along with fatigue test report and check the results.

符合標準 ISO20957: 檢查有冇 ISO20957 嘅證書, which means the equipment has passed the International Organization for Standardization.

穩定性: 試下推個釘裝機去 check 下佢係咪穩定. 喺好似 Lat Pulldown 噉嘅機器上面, 揀最大重量, then suddenly loosen the handle to see if the device is still stable.

總淨重: 減去重量板; 重啲, the safer.

整體結構: the surface of the fitness equipment pipe should be free of any protrusions so as to avoid injury.

表面嘅邊緣同角落應該有半徑 ≥ 2.5mm. They should also be free of burrs and make use of round corners.

管結束: 所有管端都應該係冇障礙手, and the foot area should be closed off.

You should be able to stop the motion at any time.

The weight selection pin should be fitted with a holding system to prevent accidental change or movement during exercise.

睇下有冇 R&啲中心去設計自己嘅力量設備; talk with the designers about design concepts.

問下設計師係 R&啲中心如果佢哋平時用 gym 設備鍛煉. Designers who do not work out with gym equipment should never design any strength training machine.

你應該自己試下健身器材. 你需要體驗以下三個方面:

Whether it is smooth to use.

Whether specific equipment is activating your targeted muscle group.

用於融合及分歧設備, whether there is a peak contraction experience.

Know about the specific treatment methods applied to the surface.

Check if the surface is smooth to the touch.

攞個硬金屬物件, 例如鎖匙, and scratch the surface of the equipment in order to see the adhesion of the surface coating.

管標準: 問供應商有關呢條管嘅標準. 係中國, 例如, you should expect fitness equipment pipes to meet Q235 standard.

管道大小: 要搵 40mm x 80mm 以上，係車架管嘅長度同寬度, preferably with 3.0mm in thickness.

治療: bending production procedure is preferred over cutting and welding.

檢查原料嘅厚度, not the the painted tube.

問廠代表關於治療方法，如果係喺廠房，就唔好再搵啦, as well as the theoretical basis of the connection.

Check the thickness of the connecting plate and the strength of the screw.

-座位填充:

Press the seat firmly with your thumb or apply a specific instrument to measure its density level.

-座位皮革:

聞到: Check whether there is any pungent smell.

觸覺印象: Touch the surface by hand and confirm the tactile impression.

密度: 從切割 / 側面觀察，並檢查其孔隙; 孔子越多, the lower the density and quality.

厚度: 檢查材料嘅厚度; 越厚, 越好;

-座位支援盤

檢查所用嘅材料. 一般嚟講, ABS is better than iron board and plywood.

Check the appropriateness of the match between fillings and support plate.

-座位調整員

調整幾次座位，睇下係咪易用. 調整完座位之後, sit on it and shake to test its stability.

-普利利

物質: Determine the material used and assess whether it is appropriate based on our comparison chart.

穩定性: Make the pulley rotate and observe whether it wobbles.

-CAM:

Determine the material applied and assess whether it is suitable according to the comparison chart.

Check whether the pulley and CAM are smooth when used.

Use the machine and confirm whether its design is in line with the principle of movement.

-有線電視:

檢查電纜嘅厚度; 越厚, the more solid the cable will be.

如果你買嚟商業用途, never be cheated by manufacturers who apply home use material to industrial equipment.

Ask about the maximum load capacity along with fatigue test report and check the results.

符合標準 ISO20957: 檢查有冇 ISO20957 嘅證書, which means the equipment has passed the International Organization for Standardization.

穩定性: 試下推個釘裝機去 check 下佢係咪穩定. 喺好似 Lat Pulldown 噉嘅機器上面, 揀最大重量, then suddenly loosen the handle to see if the device is still stable.

總淨重: 減去重量板; 重啲, the safer.

整體結構: the surface of the fitness equipment pipe should be free of any protrusions so as to avoid injury.

表面嘅邊緣同角落應該有半徑 ≥ 2.5mm. They should also be free of burrs and make use of round corners.

管結束: 所有管端都應該係冇障礙手, and the foot area should be closed off.

You should be able to stop the motion at any time.

The weight selection pin should be fitted with a holding system to prevent accidental change or movement during exercise.