R이 있는지 확인&D센터 자체 근력장비 설계; talk with the designers about design concepts.

R의 디자이너에게 물어보세요&주로 체육관 장비를 가지고 운동하는 경우 D 센터. Designers who do not work out with gym equipment should never design any strength training machine.

운동기구를 직접 사용해 보아야 합니다.. 다음 세 가지 측면을 경험해야 합니다.:

Whether it is smooth to use.

Whether specific equipment is activating your targeted muscle group.

수렴 및 발산 장비용, whether there is a peak contraction experience.

Know about the specific treatment methods applied to the surface.

Check if the surface is smooth to the touch.

단단한 금속 물체를 가져 가라., 열쇠 같은 것, and scratch the surface of the equipment in order to see the adhesion of the surface coating.

파이프 규격: 공급업체에 이 파이프의 표준에 대해 문의하세요.. 중국에서는, 예를 들어, you should expect fitness equipment pipes to meet Q235 standard.

파이프 크기: 프레임 파이프의 길이와 너비는 40mm x 80mm 이상을 찾으세요., preferably with 3.0mm in thickness.

치료: bending production procedure is preferred over cutting and welding.

원재료의 두께를 확인하세요., not the the painted tube.

처리 방법은 공장 담당자에게 문의하세요., as well as the theoretical basis of the connection.

Check the thickness of the connecting plate and the strength of the screw.

-좌석 충전재:

Press the seat firmly with your thumb or apply a specific instrument to measure its density level.

-좌석 가죽:

냄새가 나다: Check whether there is any pungent smell.

촉각적 인상: Touch the surface by hand and confirm the tactile impression.

밀도: 절단면/측면에서 관찰하고 기공을 확인한다.; 기공이 많을수록, the lower the density and quality.

두께: 재료의 두께를 확인하세요.; 두꺼울수록, 더 나은;

-좌석 지지판

사용된 재료를 확인하세요. 일반적으로 말하면, ABS is better than iron board and plywood.

Check the appropriateness of the match between fillings and support plate.

-좌석 조절 장치

좌석을 여러 번 조정하여 사용하기 쉬운지 확인하십시오.. 좌석을 조정한 후, sit on it and shake to test its stability.

-고패

재료: Determine the material used and assess whether it is appropriate based on our comparison chart.

안정: Make the pulley rotate and observe whether it wobbles.

-캠:

Determine the material applied and assess whether it is suitable according to the comparison chart.

Check whether the pulley and CAM are smooth when used.

Use the machine and confirm whether its design is in line with the principle of movement.

-케이블:

케이블 굵기를 확인해보세요; 두꺼울수록, the more solid the cable will be.

상업적인 용도로 구매하는 경우, never be cheated by manufacturers who apply home use material to industrial equipment.

Ask about the maximum load capacity along with fatigue test report and check the results.

표준 ISO20957 충족: ISO20957 인증서가 있는지 확인하세요., which means the equipment has passed the International Organization for Standardization.

안정: 핀이 장착된 기계를 밀어서 안정적인지 확인해보세요.. 랫풀다운 같은 머신에서, 최대 무게를 선택하세요, then suddenly loosen the handle to see if the device is still stable.

총 순중량: 웨이트 플레이트 빼기; 무거울수록, the safer.

전체 구조: the surface of the fitness equipment pipe should be free of any protrusions so as to avoid injury.

표면의 가장자리와 모서리는 반경 r ≥ 2.5mm를 가져야 합니다.. They should also be free of burrs and make use of round corners.

튜브 끝: 모든 튜브 끝부분은 접근 가능한 손에 있어야 합니다., and the foot area should be closed off.

You should be able to stop the motion at any time.

The weight selection pin should be fitted with a holding system to prevent accidental change or movement during exercise.

R이 있는지 확인&D센터 자체 근력장비 설계; talk with the designers about design concepts.

R의 디자이너에게 물어보세요&주로 체육관 장비를 가지고 운동하는 경우 D 센터. Designers who do not work out with gym equipment should never design any strength training machine.

운동기구를 직접 사용해 보아야 합니다.. 다음 세 가지 측면을 경험해야 합니다.:

Whether it is smooth to use.

Whether specific equipment is activating your targeted muscle group.

수렴 및 발산 장비용, whether there is a peak contraction experience.

Know about the specific treatment methods applied to the surface.

Check if the surface is smooth to the touch.

단단한 금속 물체를 가져 가라., 열쇠 같은 것, and scratch the surface of the equipment in order to see the adhesion of the surface coating.

파이프 규격: 공급업체에 이 파이프의 표준에 대해 문의하세요.. 중국에서는, 예를 들어, you should expect fitness equipment pipes to meet Q235 standard.

파이프 크기: 프레임 파이프의 길이와 너비는 40mm x 80mm 이상을 찾으세요., preferably with 3.0mm in thickness.

치료: bending production procedure is preferred over cutting and welding.

원재료의 두께를 확인하세요., not the the painted tube.

처리 방법은 공장 담당자에게 문의하세요., as well as the theoretical basis of the connection.

Check the thickness of the connecting plate and the strength of the screw.

-좌석 충전재:

Press the seat firmly with your thumb or apply a specific instrument to measure its density level.

-좌석 가죽:

냄새가 나다: Check whether there is any pungent smell.

촉각적 인상: Touch the surface by hand and confirm the tactile impression.

밀도: 절단면/측면에서 관찰하고 기공을 확인한다.; 기공이 많을수록, the lower the density and quality.

두께: 재료의 두께를 확인하세요.; 두꺼울수록, 더 나은;

-좌석 지지판

사용된 재료를 확인하세요. 일반적으로 말하면, ABS is better than iron board and plywood.

Check the appropriateness of the match between fillings and support plate.

-좌석 조절 장치

좌석을 여러 번 조정하여 사용하기 쉬운지 확인하십시오.. 좌석을 조정한 후, sit on it and shake to test its stability.

-고패

재료: Determine the material used and assess whether it is appropriate based on our comparison chart.

안정: Make the pulley rotate and observe whether it wobbles.

-캠:

Determine the material applied and assess whether it is suitable according to the comparison chart.

Check whether the pulley and CAM are smooth when used.

Use the machine and confirm whether its design is in line with the principle of movement.

-케이블:

케이블 굵기를 확인해보세요; 두꺼울수록, the more solid the cable will be.

상업적인 용도로 구매하는 경우, never be cheated by manufacturers who apply home use material to industrial equipment.

Ask about the maximum load capacity along with fatigue test report and check the results.

표준 ISO20957 충족: ISO20957 인증서가 있는지 확인하세요., which means the equipment has passed the International Organization for Standardization.

안정: 핀이 장착된 기계를 밀어서 안정적인지 확인해보세요.. 랫풀다운 같은 머신에서, 최대 무게를 선택하세요, then suddenly loosen the handle to see if the device is still stable.

총 순중량: 웨이트 플레이트 빼기; 무거울수록, the safer.

전체 구조: the surface of the fitness equipment pipe should be free of any protrusions so as to avoid injury.

표면의 가장자리와 모서리는 반경 r ≥ 2.5mm를 가져야 합니다.. They should also be free of burrs and make use of round corners.

튜브 끝: 모든 튜브 끝부분은 접근 가능한 손에 있어야 합니다., and the foot area should be closed off.

You should be able to stop the motion at any time.

The weight selection pin should be fitted with a holding system to prevent accidental change or movement during exercise.

R이 있는지 확인&D센터 자체 근력장비 설계; talk with the designers about design concepts.

R의 디자이너에게 물어보세요&주로 체육관 장비를 가지고 운동하는 경우 D 센터. Designers who do not work out with gym equipment should never design any strength training machine.

운동기구를 직접 사용해 보아야 합니다.. 다음 세 가지 측면을 경험해야 합니다.:

Whether it is smooth to use.

Whether specific equipment is activating your targeted muscle group.

수렴 및 발산 장비용, whether there is a peak contraction experience.

Know about the specific treatment methods applied to the surface.

Check if the surface is smooth to the touch.

단단한 금속 물체를 가져 가라., 열쇠 같은 것, and scratch the surface of the equipment in order to see the adhesion of the surface coating.

파이프 규격: 공급업체에 이 파이프의 표준에 대해 문의하세요.. 중국에서는, 예를 들어, you should expect fitness equipment pipes to meet Q235 standard.

파이프 크기: 프레임 파이프의 길이와 너비는 40mm x 80mm 이상을 찾으세요., preferably with 3.0mm in thickness.

치료: bending production procedure is preferred over cutting and welding.

원재료의 두께를 확인하세요., not the the painted tube.

처리 방법은 공장 담당자에게 문의하세요., as well as the theoretical basis of the connection.

Check the thickness of the connecting plate and the strength of the screw.

-좌석 충전재:

Press the seat firmly with your thumb or apply a specific instrument to measure its density level.

-좌석 가죽:

냄새가 나다: Check whether there is any pungent smell.

촉각적 인상: Touch the surface by hand and confirm the tactile impression.

밀도: 절단면/측면에서 관찰하고 기공을 확인한다.; 기공이 많을수록, the lower the density and quality.

두께: 재료의 두께를 확인하세요.; 두꺼울수록, 더 나은;

-좌석 지지판

사용된 재료를 확인하세요. 일반적으로 말하면, ABS is better than iron board and plywood.

Check the appropriateness of the match between fillings and support plate.

-좌석 조절 장치

좌석을 여러 번 조정하여 사용하기 쉬운지 확인하십시오.. 좌석을 조정한 후, sit on it and shake to test its stability.

-고패

재료: Determine the material used and assess whether it is appropriate based on our comparison chart.

안정: Make the pulley rotate and observe whether it wobbles.

-캠:

Determine the material applied and assess whether it is suitable according to the comparison chart.

Check whether the pulley and CAM are smooth when used.

Use the machine and confirm whether its design is in line with the principle of movement.

-케이블:

케이블 굵기를 확인해보세요; 두꺼울수록, the more solid the cable will be.

상업적인 용도로 구매하는 경우, never be cheated by manufacturers who apply home use material to industrial equipment.

Ask about the maximum load capacity along with fatigue test report and check the results.

표준 ISO20957 충족: ISO20957 인증서가 있는지 확인하세요., which means the equipment has passed the International Organization for Standardization.

안정: 핀이 장착된 기계를 밀어서 안정적인지 확인해보세요.. 랫풀다운 같은 머신에서, 최대 무게를 선택하세요, then suddenly loosen the handle to see if the device is still stable.

총 순중량: 웨이트 플레이트 빼기; 무거울수록, the safer.

전체 구조: the surface of the fitness equipment pipe should be free of any protrusions so as to avoid injury.

표면의 가장자리와 모서리는 반경 r ≥ 2.5mm를 가져야 합니다.. They should also be free of burrs and make use of round corners.

튜브 끝: 모든 튜브 끝부분은 접근 가능한 손에 있어야 합니다., and the foot area should be closed off.

You should be able to stop the motion at any time.

The weight selection pin should be fitted with a holding system to prevent accidental change or movement during exercise.

R이 있는지 확인&D센터 자체 근력장비 설계; talk with the designers about design concepts.

R의 디자이너에게 물어보세요&주로 체육관 장비를 가지고 운동하는 경우 D 센터. Designers who do not work out with gym equipment should never design any strength training machine.

운동기구를 직접 사용해 보아야 합니다.. 다음 세 가지 측면을 경험해야 합니다.:

Whether it is smooth to use.

Whether specific equipment is activating your targeted muscle group.

수렴 및 발산 장비용, whether there is a peak contraction experience.

Know about the specific treatment methods applied to the surface.

Check if the surface is smooth to the touch.

단단한 금속 물체를 가져 가라., 열쇠 같은 것, and scratch the surface of the equipment in order to see the adhesion of the surface coating.

파이프 규격: 공급업체에 이 파이프의 표준에 대해 문의하세요.. 중국에서는, 예를 들어, you should expect fitness equipment pipes to meet Q235 standard.

파이프 크기: 프레임 파이프의 길이와 너비는 40mm x 80mm 이상을 찾으세요., preferably with 3.0mm in thickness.

치료: bending production procedure is preferred over cutting and welding.

원재료의 두께를 확인하세요., not the the painted tube.

처리 방법은 공장 담당자에게 문의하세요., as well as the theoretical basis of the connection.

Check the thickness of the connecting plate and the strength of the screw.

-좌석 충전재:

Press the seat firmly with your thumb or apply a specific instrument to measure its density level.

-좌석 가죽:

냄새가 나다: Check whether there is any pungent smell.

촉각적 인상: Touch the surface by hand and confirm the tactile impression.

밀도: 절단면/측면에서 관찰하고 기공을 확인한다.; 기공이 많을수록, the lower the density and quality.

두께: 재료의 두께를 확인하세요.; 두꺼울수록, 더 나은;

-좌석 지지판

사용된 재료를 확인하세요. 일반적으로 말하면, ABS is better than iron board and plywood.

Check the appropriateness of the match between fillings and support plate.

-좌석 조절 장치

좌석을 여러 번 조정하여 사용하기 쉬운지 확인하십시오.. 좌석을 조정한 후, sit on it and shake to test its stability.

-고패

재료: Determine the material used and assess whether it is appropriate based on our comparison chart.

안정: Make the pulley rotate and observe whether it wobbles.

-캠:

Determine the material applied and assess whether it is suitable according to the comparison chart.

Check whether the pulley and CAM are smooth when used.

Use the machine and confirm whether its design is in line with the principle of movement.

-케이블:

케이블 굵기를 확인해보세요; 두꺼울수록, the more solid the cable will be.

상업적인 용도로 구매하는 경우, never be cheated by manufacturers who apply home use material to industrial equipment.

Ask about the maximum load capacity along with fatigue test report and check the results.

표준 ISO20957 충족: ISO20957 인증서가 있는지 확인하세요., which means the equipment has passed the International Organization for Standardization.

안정: 핀이 장착된 기계를 밀어서 안정적인지 확인해보세요.. 랫풀다운 같은 머신에서, 최대 무게를 선택하세요, then suddenly loosen the handle to see if the device is still stable.

총 순중량: 웨이트 플레이트 빼기; 무거울수록, the safer.

전체 구조: the surface of the fitness equipment pipe should be free of any protrusions so as to avoid injury.

표면의 가장자리와 모서리는 반경 r ≥ 2.5mm를 가져야 합니다.. They should also be free of burrs and make use of round corners.

튜브 끝: 모든 튜브 끝부분은 접근 가능한 손에 있어야 합니다., and the foot area should be closed off.

You should be able to stop the motion at any time.

The weight selection pin should be fitted with a holding system to prevent accidental change or movement during exercise.

R이 있는지 확인&D센터 자체 근력장비 설계; talk with the designers about design concepts.

R의 디자이너에게 물어보세요&주로 체육관 장비를 가지고 운동하는 경우 D 센터. Designers who do not work out with gym equipment should never design any strength training machine.

운동기구를 직접 사용해 보아야 합니다.. 다음 세 가지 측면을 경험해야 합니다.:

Whether it is smooth to use.

Whether specific equipment is activating your targeted muscle group.

수렴 및 발산 장비용, whether there is a peak contraction experience.

Know about the specific treatment methods applied to the surface.

Check if the surface is smooth to the touch.

단단한 금속 물체를 가져 가라., 열쇠 같은 것, and scratch the surface of the equipment in order to see the adhesion of the surface coating.

파이프 규격: 공급업체에 이 파이프의 표준에 대해 문의하세요.. 중국에서는, 예를 들어, you should expect fitness equipment pipes to meet Q235 standard.

파이프 크기: 프레임 파이프의 길이와 너비는 40mm x 80mm 이상을 찾으세요., preferably with 3.0mm in thickness.

치료: bending production procedure is preferred over cutting and welding.

원재료의 두께를 확인하세요., not the the painted tube.

처리 방법은 공장 담당자에게 문의하세요., as well as the theoretical basis of the connection.

Check the thickness of the connecting plate and the strength of the screw.

-좌석 충전재:

Press the seat firmly with your thumb or apply a specific instrument to measure its density level.

-좌석 가죽:

냄새가 나다: Check whether there is any pungent smell.

촉각적 인상: Touch the surface by hand and confirm the tactile impression.

밀도: 절단면/측면에서 관찰하고 기공을 확인한다.; 기공이 많을수록, the lower the density and quality.

두께: 재료의 두께를 확인하세요.; 두꺼울수록, 더 나은;

-좌석 지지판

사용된 재료를 확인하세요. 일반적으로 말하면, ABS is better than iron board and plywood.

Check the appropriateness of the match between fillings and support plate.

-좌석 조절 장치

좌석을 여러 번 조정하여 사용하기 쉬운지 확인하십시오.. 좌석을 조정한 후, sit on it and shake to test its stability.

-고패

재료: Determine the material used and assess whether it is appropriate based on our comparison chart.

안정: Make the pulley rotate and observe whether it wobbles.

-캠:

Determine the material applied and assess whether it is suitable according to the comparison chart.

Check whether the pulley and CAM are smooth when used.

Use the machine and confirm whether its design is in line with the principle of movement.

-케이블:

케이블 굵기를 확인해보세요; 두꺼울수록, the more solid the cable will be.

상업적인 용도로 구매하는 경우, never be cheated by manufacturers who apply home use material to industrial equipment.

Ask about the maximum load capacity along with fatigue test report and check the results.

표준 ISO20957 충족: ISO20957 인증서가 있는지 확인하세요., which means the equipment has passed the International Organization for Standardization.

안정: 핀이 장착된 기계를 밀어서 안정적인지 확인해보세요.. 랫풀다운 같은 머신에서, 최대 무게를 선택하세요, then suddenly loosen the handle to see if the device is still stable.

총 순중량: 웨이트 플레이트 빼기; 무거울수록, the safer.

전체 구조: the surface of the fitness equipment pipe should be free of any protrusions so as to avoid injury.

표면의 가장자리와 모서리는 반경 r ≥ 2.5mm를 가져야 합니다.. They should also be free of burrs and make use of round corners.

튜브 끝: 모든 튜브 끝부분은 접근 가능한 손에 있어야 합니다., and the foot area should be closed off.

You should be able to stop the motion at any time.

The weight selection pin should be fitted with a holding system to prevent accidental change or movement during exercise.

R이 있는지 확인&D센터 자체 근력장비 설계; talk with the designers about design concepts.

R의 디자이너에게 물어보세요&주로 체육관 장비를 가지고 운동하는 경우 D 센터. Designers who do not work out with gym equipment should never design any strength training machine.

운동기구를 직접 사용해 보아야 합니다.. 다음 세 가지 측면을 경험해야 합니다.:

Whether it is smooth to use.

Whether specific equipment is activating your targeted muscle group.

수렴 및 발산 장비용, whether there is a peak contraction experience.

Know about the specific treatment methods applied to the surface.

Check if the surface is smooth to the touch.

단단한 금속 물체를 가져 가라., 열쇠 같은 것, and scratch the surface of the equipment in order to see the adhesion of the surface coating.

파이프 규격: 공급업체에 이 파이프의 표준에 대해 문의하세요.. 중국에서는, 예를 들어, you should expect fitness equipment pipes to meet Q235 standard.

파이프 크기: 프레임 파이프의 길이와 너비는 40mm x 80mm 이상을 찾으세요., preferably with 3.0mm in thickness.

치료: bending production procedure is preferred over cutting and welding.

원재료의 두께를 확인하세요., not the the painted tube.

처리 방법은 공장 담당자에게 문의하세요., as well as the theoretical basis of the connection.

Check the thickness of the connecting plate and the strength of the screw.

-좌석 충전재:

Press the seat firmly with your thumb or apply a specific instrument to measure its density level.

-좌석 가죽:

냄새가 나다: Check whether there is any pungent smell.

촉각적 인상: Touch the surface by hand and confirm the tactile impression.

밀도: 절단면/측면에서 관찰하고 기공을 확인한다.; 기공이 많을수록, the lower the density and quality.

두께: 재료의 두께를 확인하세요.; 두꺼울수록, 더 나은;

-좌석 지지판

사용된 재료를 확인하세요. 일반적으로 말하면, ABS is better than iron board and plywood.

Check the appropriateness of the match between fillings and support plate.

-좌석 조절 장치

좌석을 여러 번 조정하여 사용하기 쉬운지 확인하십시오.. 좌석을 조정한 후, sit on it and shake to test its stability.

-고패

재료: Determine the material used and assess whether it is appropriate based on our comparison chart.

안정: Make the pulley rotate and observe whether it wobbles.

-캠:

Determine the material applied and assess whether it is suitable according to the comparison chart.

Check whether the pulley and CAM are smooth when used.

Use the machine and confirm whether its design is in line with the principle of movement.

-케이블:

케이블 굵기를 확인해보세요; 두꺼울수록, the more solid the cable will be.

상업적인 용도로 구매하는 경우, never be cheated by manufacturers who apply home use material to industrial equipment.

Ask about the maximum load capacity along with fatigue test report and check the results.

표준 ISO20957 충족: ISO20957 인증서가 있는지 확인하세요., which means the equipment has passed the International Organization for Standardization.

안정: 핀이 장착된 기계를 밀어서 안정적인지 확인해보세요.. 랫풀다운 같은 머신에서, 최대 무게를 선택하세요, then suddenly loosen the handle to see if the device is still stable.

총 순중량: 웨이트 플레이트 빼기; 무거울수록, the safer.

전체 구조: the surface of the fitness equipment pipe should be free of any protrusions so as to avoid injury.

표면의 가장자리와 모서리는 반경 r ≥ 2.5mm를 가져야 합니다.. They should also be free of burrs and make use of round corners.

튜브 끝: 모든 튜브 끝부분은 접근 가능한 손에 있어야 합니다., and the foot area should be closed off.

You should be able to stop the motion at any time.

The weight selection pin should be fitted with a holding system to prevent accidental change or movement during exercise.

R이 있는지 확인&D센터 자체 근력장비 설계; talk with the designers about design concepts.

R의 디자이너에게 물어보세요&주로 체육관 장비를 가지고 운동하는 경우 D 센터. Designers who do not work out with gym equipment should never design any strength training machine.

운동기구를 직접 사용해 보아야 합니다.. 다음 세 가지 측면을 경험해야 합니다.:

Whether it is smooth to use.

Whether specific equipment is activating your targeted muscle group.

수렴 및 발산 장비용, whether there is a peak contraction experience.

Know about the specific treatment methods applied to the surface.

Check if the surface is smooth to the touch.

단단한 금속 물체를 가져 가라., 열쇠 같은 것, and scratch the surface of the equipment in order to see the adhesion of the surface coating.

파이프 규격: 공급업체에 이 파이프의 표준에 대해 문의하세요.. 중국에서는, 예를 들어, you should expect fitness equipment pipes to meet Q235 standard.

파이프 크기: 프레임 파이프의 길이와 너비는 40mm x 80mm 이상을 찾으세요., preferably with 3.0mm in thickness.

치료: bending production procedure is preferred over cutting and welding.

원재료의 두께를 확인하세요., not the the painted tube.

처리 방법은 공장 담당자에게 문의하세요., as well as the theoretical basis of the connection.

Check the thickness of the connecting plate and the strength of the screw.

-좌석 충전재:

Press the seat firmly with your thumb or apply a specific instrument to measure its density level.

-좌석 가죽:

냄새가 나다: Check whether there is any pungent smell.

촉각적 인상: Touch the surface by hand and confirm the tactile impression.

밀도: 절단면/측면에서 관찰하고 기공을 확인한다.; 기공이 많을수록, the lower the density and quality.

두께: 재료의 두께를 확인하세요.; 두꺼울수록, 더 나은;

-좌석 지지판

사용된 재료를 확인하세요. 일반적으로 말하면, ABS is better than iron board and plywood.

Check the appropriateness of the match between fillings and support plate.

-좌석 조절 장치

좌석을 여러 번 조정하여 사용하기 쉬운지 확인하십시오.. 좌석을 조정한 후, sit on it and shake to test its stability.

-고패

재료: Determine the material used and assess whether it is appropriate based on our comparison chart.

안정: Make the pulley rotate and observe whether it wobbles.

-캠:

Determine the material applied and assess whether it is suitable according to the comparison chart.

Check whether the pulley and CAM are smooth when used.

Use the machine and confirm whether its design is in line with the principle of movement.

-케이블:

케이블 굵기를 확인해보세요; 두꺼울수록, the more solid the cable will be.

상업적인 용도로 구매하는 경우, never be cheated by manufacturers who apply home use material to industrial equipment.

Ask about the maximum load capacity along with fatigue test report and check the results.

표준 ISO20957 충족: ISO20957 인증서가 있는지 확인하세요., which means the equipment has passed the International Organization for Standardization.

안정: 핀이 장착된 기계를 밀어서 안정적인지 확인해보세요.. 랫풀다운 같은 머신에서, 최대 무게를 선택하세요, then suddenly loosen the handle to see if the device is still stable.

총 순중량: 웨이트 플레이트 빼기; 무거울수록, the safer.

전체 구조: the surface of the fitness equipment pipe should be free of any protrusions so as to avoid injury.

표면의 가장자리와 모서리는 반경 r ≥ 2.5mm를 가져야 합니다.. They should also be free of burrs and make use of round corners.

튜브 끝: 모든 튜브 끝부분은 접근 가능한 손에 있어야 합니다., and the foot area should be closed off.

You should be able to stop the motion at any time.

The weight selection pin should be fitted with a holding system to prevent accidental change or movement during exercise.

R이 있는지 확인&D센터 자체 근력장비 설계; talk with the designers about design concepts.

R의 디자이너에게 물어보세요&주로 체육관 장비를 가지고 운동하는 경우 D 센터. Designers who do not work out with gym equipment should never design any strength training machine.

운동기구를 직접 사용해 보아야 합니다.. 다음 세 가지 측면을 경험해야 합니다.:

Whether it is smooth to use.

Whether specific equipment is activating your targeted muscle group.

수렴 및 발산 장비용, whether there is a peak contraction experience.

Know about the specific treatment methods applied to the surface.

Check if the surface is smooth to the touch.

단단한 금속 물체를 가져 가라., 열쇠 같은 것, and scratch the surface of the equipment in order to see the adhesion of the surface coating.

파이프 규격: 공급업체에 이 파이프의 표준에 대해 문의하세요.. 중국에서는, 예를 들어, you should expect fitness equipment pipes to meet Q235 standard.

파이프 크기: 프레임 파이프의 길이와 너비는 40mm x 80mm 이상을 찾으세요., preferably with 3.0mm in thickness.

치료: bending production procedure is preferred over cutting and welding.

원재료의 두께를 확인하세요., not the the painted tube.

처리 방법은 공장 담당자에게 문의하세요., as well as the theoretical basis of the connection.

Check the thickness of the connecting plate and the strength of the screw.

-좌석 충전재:

Press the seat firmly with your thumb or apply a specific instrument to measure its density level.

-좌석 가죽:

냄새가 나다: Check whether there is any pungent smell.

촉각적 인상: Touch the surface by hand and confirm the tactile impression.

밀도: 절단면/측면에서 관찰하고 기공을 확인한다.; 기공이 많을수록, the lower the density and quality.

두께: 재료의 두께를 확인하세요.; 두꺼울수록, 더 나은;

-좌석 지지판

사용된 재료를 확인하세요. 일반적으로 말하면, ABS is better than iron board and plywood.

Check the appropriateness of the match between fillings and support plate.

-좌석 조절 장치

좌석을 여러 번 조정하여 사용하기 쉬운지 확인하십시오.. 좌석을 조정한 후, sit on it and shake to test its stability.

-고패

재료: Determine the material used and assess whether it is appropriate based on our comparison chart.

안정: Make the pulley rotate and observe whether it wobbles.

-캠:

Determine the material applied and assess whether it is suitable according to the comparison chart.

Check whether the pulley and CAM are smooth when used.

Use the machine and confirm whether its design is in line with the principle of movement.

-케이블:

케이블 굵기를 확인해보세요; 두꺼울수록, the more solid the cable will be.

상업적인 용도로 구매하는 경우, never be cheated by manufacturers who apply home use material to industrial equipment.

Ask about the maximum load capacity along with fatigue test report and check the results.

표준 ISO20957 충족: ISO20957 인증서가 있는지 확인하세요., which means the equipment has passed the International Organization for Standardization.

안정: 핀이 장착된 기계를 밀어서 안정적인지 확인해보세요.. 랫풀다운 같은 머신에서, 최대 무게를 선택하세요, then suddenly loosen the handle to see if the device is still stable.

총 순중량: 웨이트 플레이트 빼기; 무거울수록, the safer.

전체 구조: the surface of the fitness equipment pipe should be free of any protrusions so as to avoid injury.

표면의 가장자리와 모서리는 반경 r ≥ 2.5mm를 가져야 합니다.. They should also be free of burrs and make use of round corners.

튜브 끝: 모든 튜브 끝부분은 접근 가능한 손에 있어야 합니다., and the foot area should be closed off.

You should be able to stop the motion at any time.

The weight selection pin should be fitted with a holding system to prevent accidental change or movement during exercise.