Kyk of daar 'n R is&D-sentrum om sy eie kragtoerusting te ontwerp; talk with the designers about design concepts.

Vra ontwerpers by die R&D-sentrum as hulle gewoonlik met gimnasiumtoerusting oefen. Designers who do not work out with gym equipment should never design any strength training machine.

Jy moet self die fiksheidstoerusting probeer. Jy moet die volgende drie aspekte ervaar:

Whether it is smooth to use.

Whether specific equipment is activating your targeted muscle group.

Vir konvergerende en divergerende toerusting, whether there is a peak contraction experience.

Know about the specific treatment methods applied to the surface.

Check if the surface is smooth to the touch.

Neem 'n harde metaal voorwerp, soos 'n sleutel, and scratch the surface of the equipment in order to see the adhesion of the surface coating.

Pyp standaard: vra die verskaffer oor die standaard van hierdie pyp. In China, byvoorbeeld, you should expect fitness equipment pipes to meet Q235 standard.

Pyp grootte: Soek 40 mm x 80 mm en hoër vir die lengte en breedte van die raampyp, preferably with 3.0mm in thickness.

Behandeling: bending production procedure is preferred over cutting and welding.

Kontroleer die dikte van die grondstof, not the the painted tube.

Vra die fabrieksverteenwoordiger oor die behandelingsmetodes, as well as the theoretical basis of the connection.

Check the thickness of the connecting plate and the strength of the screw.

-Sitplekvulsels:

Press the seat firmly with your thumb or apply a specific instrument to measure its density level.

-Sitplek leer:

Reuk: Check whether there is any pungent smell.

Tasbare indruk: Touch the surface by hand and confirm the tactile impression.

Digtheid: Neem waar vanaf die sny-/syoppervlak en kontroleer die huidmondjies daarvan; hoe meer huidmondjies daar is, the lower the density and quality.

Dikte: Kontroleer die dikte van die materiaal; hoe dikker, hoe beter;

-Sitpleksteunplaat

Kontroleer die materiaal wat gebruik word. Oor die algemeen, ABS is better than iron board and plywood.

Check the appropriateness of the match between fillings and support plate.

-Sitplekversteller

Verstel die sitplek verskeie kere om te kyk of dit maklik is om te gebruik. Nadat u die sitplek verstel het, sit on it and shake to test its stability.

-Katrol

Materiaal: Determine the material used and assess whether it is appropriate based on our comparison chart.

Stabiliteit: Make the pulley rotate and observe whether it wobbles.

-CAM:

Determine the material applied and assess whether it is suitable according to the comparison chart.

Check whether the pulley and CAM are smooth when used.

Use the machine and confirm whether its design is in line with the principle of movement.

-Kabel:

Kontroleer die dikte van die kabel; hoe dikker is dit, the more solid the cable will be.

As jy koop vir kommersiële gebruik, never be cheated by manufacturers who apply home use material to industrial equipment.

Ask about the maximum load capacity along with fatigue test report and check the results.

Voldoen aan die standaard ISO20957: Kyk of daar 'n sertifikaat van ISO20957 is, which means the equipment has passed the International Organization for Standardization.

Stabiliteit: Probeer om 'n pen-gelaaide masjien te druk om te kyk of dit stabiel is. Op masjiene soos die Lat Pulldown, kies die maksimum gewig, then suddenly loosen the handle to see if the device is still stable.

Totale netto gewig: trek die gewigplate af; hoe swaarder, the safer.

Algehele struktuur: the surface of the fitness equipment pipe should be free of any protrusions so as to avoid injury.

Die rande en hoeke van die oppervlak moet 'n radius r ≥ 2,5 mm hê. They should also be free of burrs and make use of round corners.

buis eindig: Al die buispunte moet in die toeganklike hand wees, and the foot area should be closed off.

You should be able to stop the motion at any time.

The weight selection pin should be fitted with a holding system to prevent accidental change or movement during exercise.

Kyk of daar 'n R is&D-sentrum om sy eie kragtoerusting te ontwerp; talk with the designers about design concepts.

Vra ontwerpers by die R&D-sentrum as hulle gewoonlik met gimnasiumtoerusting oefen. Designers who do not work out with gym equipment should never design any strength training machine.

Jy moet self die fiksheidstoerusting probeer. Jy moet die volgende drie aspekte ervaar:

Whether it is smooth to use.

Whether specific equipment is activating your targeted muscle group.

Vir konvergerende en divergerende toerusting, whether there is a peak contraction experience.

Know about the specific treatment methods applied to the surface.

Check if the surface is smooth to the touch.

Neem 'n harde metaal voorwerp, soos 'n sleutel, and scratch the surface of the equipment in order to see the adhesion of the surface coating.

Pyp standaard: vra die verskaffer oor die standaard van hierdie pyp. In China, byvoorbeeld, you should expect fitness equipment pipes to meet Q235 standard.

Pyp grootte: Soek 40 mm x 80 mm en hoër vir die lengte en breedte van die raampyp, preferably with 3.0mm in thickness.

Behandeling: bending production procedure is preferred over cutting and welding.

Kontroleer die dikte van die grondstof, not the the painted tube.

Vra die fabrieksverteenwoordiger oor die behandelingsmetodes, as well as the theoretical basis of the connection.

Check the thickness of the connecting plate and the strength of the screw.

-Sitplekvulsels:

Press the seat firmly with your thumb or apply a specific instrument to measure its density level.

-Sitplek leer:

Reuk: Check whether there is any pungent smell.

Tasbare indruk: Touch the surface by hand and confirm the tactile impression.

Digtheid: Neem waar vanaf die sny-/syoppervlak en kontroleer die huidmondjies daarvan; hoe meer huidmondjies daar is, the lower the density and quality.

Dikte: Kontroleer die dikte van die materiaal; hoe dikker, hoe beter;

-Sitpleksteunplaat

Kontroleer die materiaal wat gebruik word. Oor die algemeen, ABS is better than iron board and plywood.

Check the appropriateness of the match between fillings and support plate.

-Sitplekversteller

Verstel die sitplek verskeie kere om te kyk of dit maklik is om te gebruik. Nadat u die sitplek verstel het, sit on it and shake to test its stability.

-Katrol

Materiaal: Determine the material used and assess whether it is appropriate based on our comparison chart.

Stabiliteit: Make the pulley rotate and observe whether it wobbles.

-CAM:

Determine the material applied and assess whether it is suitable according to the comparison chart.

Check whether the pulley and CAM are smooth when used.

Use the machine and confirm whether its design is in line with the principle of movement.

-Kabel:

Kontroleer die dikte van die kabel; hoe dikker is dit, the more solid the cable will be.

As jy koop vir kommersiële gebruik, never be cheated by manufacturers who apply home use material to industrial equipment.

Ask about the maximum load capacity along with fatigue test report and check the results.

Voldoen aan die standaard ISO20957: Kyk of daar 'n sertifikaat van ISO20957 is, which means the equipment has passed the International Organization for Standardization.

Stabiliteit: Probeer om 'n pen-gelaaide masjien te druk om te kyk of dit stabiel is. Op masjiene soos die Lat Pulldown, kies die maksimum gewig, then suddenly loosen the handle to see if the device is still stable.

Totale netto gewig: trek die gewigplate af; hoe swaarder, the safer.

Algehele struktuur: the surface of the fitness equipment pipe should be free of any protrusions so as to avoid injury.

Die rande en hoeke van die oppervlak moet 'n radius r ≥ 2,5 mm hê. They should also be free of burrs and make use of round corners.

buis eindig: Al die buispunte moet in die toeganklike hand wees, and the foot area should be closed off.

You should be able to stop the motion at any time.

The weight selection pin should be fitted with a holding system to prevent accidental change or movement during exercise.

Kyk of daar 'n R is&D-sentrum om sy eie kragtoerusting te ontwerp; talk with the designers about design concepts.

Vra ontwerpers by die R&D-sentrum as hulle gewoonlik met gimnasiumtoerusting oefen. Designers who do not work out with gym equipment should never design any strength training machine.

Jy moet self die fiksheidstoerusting probeer. Jy moet die volgende drie aspekte ervaar:

Whether it is smooth to use.

Whether specific equipment is activating your targeted muscle group.

Vir konvergerende en divergerende toerusting, whether there is a peak contraction experience.

Know about the specific treatment methods applied to the surface.

Check if the surface is smooth to the touch.

Neem 'n harde metaal voorwerp, soos 'n sleutel, and scratch the surface of the equipment in order to see the adhesion of the surface coating.

Pyp standaard: vra die verskaffer oor die standaard van hierdie pyp. In China, byvoorbeeld, you should expect fitness equipment pipes to meet Q235 standard.

Pyp grootte: Soek 40 mm x 80 mm en hoër vir die lengte en breedte van die raampyp, preferably with 3.0mm in thickness.

Behandeling: bending production procedure is preferred over cutting and welding.

Kontroleer die dikte van die grondstof, not the the painted tube.

Vra die fabrieksverteenwoordiger oor die behandelingsmetodes, as well as the theoretical basis of the connection.

Check the thickness of the connecting plate and the strength of the screw.

-Sitplekvulsels:

Press the seat firmly with your thumb or apply a specific instrument to measure its density level.

-Sitplek leer:

Reuk: Check whether there is any pungent smell.

Tasbare indruk: Touch the surface by hand and confirm the tactile impression.

Digtheid: Neem waar vanaf die sny-/syoppervlak en kontroleer die huidmondjies daarvan; hoe meer huidmondjies daar is, the lower the density and quality.

Dikte: Kontroleer die dikte van die materiaal; hoe dikker, hoe beter;

-Sitpleksteunplaat

Kontroleer die materiaal wat gebruik word. Oor die algemeen, ABS is better than iron board and plywood.

Check the appropriateness of the match between fillings and support plate.

-Sitplekversteller

Verstel die sitplek verskeie kere om te kyk of dit maklik is om te gebruik. Nadat u die sitplek verstel het, sit on it and shake to test its stability.

-Katrol

Materiaal: Determine the material used and assess whether it is appropriate based on our comparison chart.

Stabiliteit: Make the pulley rotate and observe whether it wobbles.

-CAM:

Determine the material applied and assess whether it is suitable according to the comparison chart.

Check whether the pulley and CAM are smooth when used.

Use the machine and confirm whether its design is in line with the principle of movement.

-Kabel:

Kontroleer die dikte van die kabel; hoe dikker is dit, the more solid the cable will be.

As jy koop vir kommersiële gebruik, never be cheated by manufacturers who apply home use material to industrial equipment.

Ask about the maximum load capacity along with fatigue test report and check the results.

Voldoen aan die standaard ISO20957: Kyk of daar 'n sertifikaat van ISO20957 is, which means the equipment has passed the International Organization for Standardization.

Stabiliteit: Probeer om 'n pen-gelaaide masjien te druk om te kyk of dit stabiel is. Op masjiene soos die Lat Pulldown, kies die maksimum gewig, then suddenly loosen the handle to see if the device is still stable.

Totale netto gewig: trek die gewigplate af; hoe swaarder, the safer.

Algehele struktuur: the surface of the fitness equipment pipe should be free of any protrusions so as to avoid injury.

Die rande en hoeke van die oppervlak moet 'n radius r ≥ 2,5 mm hê. They should also be free of burrs and make use of round corners.

buis eindig: Al die buispunte moet in die toeganklike hand wees, and the foot area should be closed off.

You should be able to stop the motion at any time.

The weight selection pin should be fitted with a holding system to prevent accidental change or movement during exercise.

Kyk of daar 'n R is&D-sentrum om sy eie kragtoerusting te ontwerp; talk with the designers about design concepts.

Vra ontwerpers by die R&D-sentrum as hulle gewoonlik met gimnasiumtoerusting oefen. Designers who do not work out with gym equipment should never design any strength training machine.

Jy moet self die fiksheidstoerusting probeer. Jy moet die volgende drie aspekte ervaar:

Whether it is smooth to use.

Whether specific equipment is activating your targeted muscle group.

Vir konvergerende en divergerende toerusting, whether there is a peak contraction experience.

Know about the specific treatment methods applied to the surface.

Check if the surface is smooth to the touch.

Neem 'n harde metaal voorwerp, soos 'n sleutel, and scratch the surface of the equipment in order to see the adhesion of the surface coating.

Pyp standaard: vra die verskaffer oor die standaard van hierdie pyp. In China, byvoorbeeld, you should expect fitness equipment pipes to meet Q235 standard.

Pyp grootte: Soek 40 mm x 80 mm en hoër vir die lengte en breedte van die raampyp, preferably with 3.0mm in thickness.

Behandeling: bending production procedure is preferred over cutting and welding.

Kontroleer die dikte van die grondstof, not the the painted tube.

Vra die fabrieksverteenwoordiger oor die behandelingsmetodes, as well as the theoretical basis of the connection.

Check the thickness of the connecting plate and the strength of the screw.

-Sitplekvulsels:

Press the seat firmly with your thumb or apply a specific instrument to measure its density level.

-Sitplek leer:

Reuk: Check whether there is any pungent smell.

Tasbare indruk: Touch the surface by hand and confirm the tactile impression.

Digtheid: Neem waar vanaf die sny-/syoppervlak en kontroleer die huidmondjies daarvan; hoe meer huidmondjies daar is, the lower the density and quality.

Dikte: Kontroleer die dikte van die materiaal; hoe dikker, hoe beter;

-Sitpleksteunplaat

Kontroleer die materiaal wat gebruik word. Oor die algemeen, ABS is better than iron board and plywood.

Check the appropriateness of the match between fillings and support plate.

-Sitplekversteller

Verstel die sitplek verskeie kere om te kyk of dit maklik is om te gebruik. Nadat u die sitplek verstel het, sit on it and shake to test its stability.

-Katrol

Materiaal: Determine the material used and assess whether it is appropriate based on our comparison chart.

Stabiliteit: Make the pulley rotate and observe whether it wobbles.

-CAM:

Determine the material applied and assess whether it is suitable according to the comparison chart.

Check whether the pulley and CAM are smooth when used.

Use the machine and confirm whether its design is in line with the principle of movement.

-Kabel:

Kontroleer die dikte van die kabel; hoe dikker is dit, the more solid the cable will be.

As jy koop vir kommersiële gebruik, never be cheated by manufacturers who apply home use material to industrial equipment.

Ask about the maximum load capacity along with fatigue test report and check the results.

Voldoen aan die standaard ISO20957: Kyk of daar 'n sertifikaat van ISO20957 is, which means the equipment has passed the International Organization for Standardization.

Stabiliteit: Probeer om 'n pen-gelaaide masjien te druk om te kyk of dit stabiel is. Op masjiene soos die Lat Pulldown, kies die maksimum gewig, then suddenly loosen the handle to see if the device is still stable.

Totale netto gewig: trek die gewigplate af; hoe swaarder, the safer.

Algehele struktuur: the surface of the fitness equipment pipe should be free of any protrusions so as to avoid injury.

Die rande en hoeke van die oppervlak moet 'n radius r ≥ 2,5 mm hê. They should also be free of burrs and make use of round corners.

buis eindig: Al die buispunte moet in die toeganklike hand wees, and the foot area should be closed off.

You should be able to stop the motion at any time.

The weight selection pin should be fitted with a holding system to prevent accidental change or movement during exercise.